Talking about how to attach importance to the safe production of machinery

Feed processing machinery is often used in many farms. The correct use of the equipment can ensure the feed output, and the correct operation method can also extend the service life of the equipment. In order to ensure safe production, regular maintenance must be carried out.

First of all, feed machinery manufacturers need to pay attention to the inevitable collision of feed processing machinery in the process of transportation, loading and unloading. Before use, check whether the bolts and nuts of each part are loose, and whether the flat teeth, round teeth and nuts are loose, and tighten them in time. Then turn the pulley by hand to check whether the machine is collided.

Secondly, in the process of operating feed processing machinery, attention must be paid to strictly controlling the cleanliness of materials. If any sundries are found in the materials, we must clean them up. Iron tools and stones are strictly prohibited. Enter the machine to avoid damage to the machine and injury to personnel.

Third, during the operation of the feed processing unit, the feeding speed needs to be strictly controlled. Pay attention to the load degree of uniform feeding and power to avoid blockage.

For many farmers, the normal operation of complete feed equipment will directly affect the quality of feed, as well as the normal diet and growth of animals on the farm.

In the process of selecting complete feed equipment, it is necessary to consider the influence of various factors of different processing machinery. For example, when selecting a crusher, factors such as output demand, raw material particle size, water content, raw material crushing degree, raw material moisture absorption and raw material sensitivity to temperature should be considered.

After the model selection, the complete set of feeding equipment must be reasonably installed. For example, if the crusher is installed improperly, its performance will not be brought into full play, resulting in a decrease in output, an increase in power consumption, accelerated wear of vulnerable parts, a decrease in the operating stability factor, and an increase in the failure rate, which cannot meet the needs of production.

After the arrival of the whole set of feed equipment, it is necessary to carefully check, especially whether the connecting parts are loose during transportation. During installation, the anchor bolts must be leveled and fixed to ensure that the crusher is firmly fixed on the foundation. The crusher can be installed separately or in the basement for sound insulation.

In addition, special attention shall be paid to the installation of the feeding and discharging system when installing the complete feeding equipment. Generally, the feeder must have the same width as the crusher inlet to ensure that the materials are evenly distributed when entering the crusher. However, the discharge system of the feeder shall ensure that all connecting sections and dampers are airtight, minimize the number of elbows installed in the pipeline, and correctly install the air duct direction and air outlet mode.